Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The revolutionary Ghost immobiliser protects your precious vehicle from key-long theft and relay theft. Your car won't start in the event that someone doesn't have your PIN code.
It also comes with Transport Mode that allows you to temporarily disable the device which is ideal for transport and servicing. It is then activated by entering a PIN again.
No Key Fobs, or Led Indicators
The Ghost 2 immobiliser offers a powerful defence against modern car-theft methods. Its invisible and engine start blocking reduces the chance of theft, offering peace of mind and saving money on insurance.
It cannot be detected by scanners and cannot be hacked with common methods like key cloning and signal jamming. The device makes use of buttons in your vehicle such as those on the steering wheel, door panels, and centre console to create an individual, programmable PIN code sequence that is up to 20 presses in length. If the correct sequence is entered or when a beacon or mobile app is used, only the vehicle owner can start the engine, providing an additional layer of security against thieves.
You can also activate an easy service mode for situations such as valet parking or servicing that require you to temporarily disable the system. The mobile app makes it simple to do this, while ensuring that your vehicle is protected during the time it is being repaired. Once the job is completed it is simple to switch back to secure mode. This ensures that your vehicle is protected at all time.
In contrast to other aftermarket immobilisers that operate with a fob and a fob, the Ghost 2 can be operated directly from the vehicle's existing buttons, making it far easier to use than conventional systems. The app also functions as a spare key in emergencies and allows you to drive with the security turned off without needing to enter your PIN code.
No Radio Frequency Signals
Unlike traditional security systems that have their own dedicated remote and remote, the Ghost 2 immobiliser doesn't require any additional key fobs, and can be operated using existing buttons on the steering wheel or the centre console. It is also unnoticeable by thieves who use RF scanning or code grabbing technology, which means your car won't be able to start for the device even if they get your keys.
The device locks the engine with an unique sequence of buttons. This PIN code is entered either on the app, or by pressing the buttons on the steering column and the center console. This will allow you to secure the gearbox as well and ensures that your vehicle cannot be driven away unless you have a key in your possession or are able to enter your pin code. The device can be set to transport mode, which allows you to drive your vehicle without entering your PIN code. This provides additional protection for your vehicle when it is parked in a valet or service.
The Ghost 2 immobiliser is designed to be a theft deterrent that is as discrete as it can be, making it an appealing alternative for those who have spent a lot of money on customising their vehicles or own expensive or rare vehicles. Many people have testified that this is a fantastic method to safeguard their vehicles from theft, with some even sharing stories of attempted thefts that have been stopped by the device. The Ghost 2 is also very versatile. Customers report that it works both with regular keys and with the emergency button on their vehicle, giving them peace of mind when they're away from their car.
No Radio Frequency Scanners
Secure your vehicle from hacking, key cloning and key theft by using a Ghost immobiliser. The system utilizes the buttons on your dashboard and the steering wheel to create a unique sequence of buttons that only you know. Your car will not start without this sequence. Going On this page of a disarming sequence as well as the absence of radio frequency signals makes the device extremely difficult to penetrate or bypass.
In contrast to Thatcham approved devices that rely on radio frequency scanning, the Ghost CAN Immobiliser operates completely silently and does not require any external signals to perform its magic. It's a far safer alternative and also offers insurance approved status when installed by an TASSA approved installer (we're one of them! ).
Because of of how the Ghost immobiliser works with your vehicle, it is recommended to have an expert installer complete its installation. This will ensure that it is completely integrated with your vehicle's system, leading to optimal performance and less risk of malfunction.
Professional installation is often supported by warranties and service to increase the value of your purchase. This is a major deterrent to potential thieves who are less likely to try and bypass the device due to its numerous security features.
The Ghost is not just an effective deterrent to thieves, but it's designed to be easy to use. It can be programmed to automatically re-arm for a specific amount of time after you have parked your car. This means that you don't have to remember your PIN code every time. It also has a Service/Valet mode for those who want to take your car for valet parking or to service. This can be enabled and deactivated by an easy indicator sequence.
No Wire Cutting
The Ghost 2 is non-invasive and does not require cutting of wires during installation. It connects to the CAN data network of your vehicle and is programmable with a unique PIN. This prevents anyone else from starting the engine if they do not have a unique sequence of PINs, or app authorization.
The device is also undetectable by the specialised scanning tools which some thieves use, and it is silent because it doesn't transmit radio signals like other immobilisers. auto ghost immobiliser , sealed and so small that it can be concealed in any vehicle making it near impossible to spot.
The Ghost II also has the capability to be switched into 'transport mode' which allows it to be used for short periods of time without the need for a separate PIN. This is a great option for situations such as lending the car to a friend or family member, or in an emergency. You can start your car quickly and securely.
When installing the Ghost II, it's important to work in a well-lit space and wear safety gear for working with tools and electrical components. A basic set will allow you make precise connections. A multimeter will help verify electrical values, and ensure that your wiring is safe. Cable ties and insulation tape can be used to secure or join any exposed or cut wires that are exposed during the installation process.
It's also important to disconnect the battery prior to attempting any wiring work on your vehicle. This will prevent any airbag deployments that happen accidentally or electrical shocks from happening when the battery is disconnected while the Ghost II is still connected to the system of your vehicle.
Easy to Install
The Ghost immobiliser, a unique device from the next generation, operates by connecting directly to your vehicle's CAN Data Network. It utilizes a unique pin code to stop it from starting. This makes it more difficult to hack than standard alarm systems or after market key fobs and offers superior security against key cloning hacking as well as relay attacks.
The device can be concealed inside your vehicle, and it uses the buttons that are already present on your dashboard and the steering wheel to create an sequence that only you can recognize. This blocks thieves from being able make use of a key that is cloned to start the car. It can also stop them from using the diagnostic tool that thrives on hacking the OBD.
Installation is easy and requires no cutting of wires. The unit is connected to the vehicle's CAN bus using a constant 12V supply identified as well as a grounding connection. A multimeter is required in order to determine the correct wires. Hand tools of a basic nature will suffice for the installation. To safeguard the connections from damage, insulation tape or heat shrink tubes are recommended. Cable ties can also be used to keep the wiring neat.
After installation, the device goes into a learning mode and records your individual sequences and buttons to create your unique pin code. The information is stored in the CAN data network, which makes it impossible for anyone else to replicate the sequence and start your vehicle.
Transport Mode is a function that can be utilized in the event of an emergency, such as if you forget your PIN number, sell your vehicle or a button becomes inoperative. This will shut down the Ghost System completely, however it will automatically reactivate when you exceed 31mph for more than 15 minutes or enter your PIN Code. This is ideal for those who regularly rent out their vehicles via services such as Turo or ZipCar.